800tons cheaper 09cuptire-a steel exported to Thailand

Our company's cheaper 09CUPTIRE-A steel power boilers, heating furnaces of double bars, double high lines and medium and thick plates all adopt heat storage technology, which can fully use blast furnace gas; the ladle baking, Maerz active lime kiln and medium and thick plate heat treatment furnace all burn converter gas, which can improve the cheaper 09CUPTIRE-A steel utilization rate of secondary energy and realize negative energy steelmaking in steelmaking process.

1.4306 characteristics and applications: X2CrNi189 stainless steel, German DIN standard stainless steel. It is equivalent to 00Cr19Ni10 in my country and SUS304L in Japan. The difference from 304L stainless steel is only in terms of nitrogen content and nickel content. The former is 0.04 and 10.1, and the latter is 0.06 and 8.3. This material distinction is common in the Swedish Avista series.

The advantages of cheaper 09CUPTIRE-A steel, seamless steel pipe are high pressure resistance, good toughness, long pipe section and few joints. It is widely used and the rolling technology of domestic steel mills is also very mature. Compared with round steel, the weight of seamless steel pipe is lighter under the same strength. Seamless steel pipe manufacturing ring parts, can improve the utilization of materials, simplify the manufacturing process, save materials and processing time. Compared with the welded pipe, there is no weld on the outer surface of seamless steel pipe, and it has good compression resistance.

Quenching is a heat treatment process in which steel parts are heated to above the critical temperature, and after proper heat preservation, the parts are quickly cooled to room temperature in water or oil, so that martensite transformation occurs. The hardness of the quenched cheaper 09CUPTIRE-A steel increases sharply. Quenching is to prepare the organization for adjusting and improving the performance of cheaper 09CUPTIRE-A steel during tempering, while tempering determines the performance and life of the workpiece.

The difference between cheaper 09CUPTIRE-A steel, 10# seamless steel pipe and 20# seamless steel pipe: 1. Chemical composition Chemical composition of 10# seamless steel pipe: C: 0.07-0.13, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.15, Ni: 0.30, Cu: 0.25. Chemical composition of 20# seamless steel pipe: C: 0.07-0.23, Si: 0.17-0.37, Mn: 0.35-0.65, Cr: 0.25, Ni: 0.30, Cu: 0.25 2. Mechanical properties 10# seamless steel pipe: tensile strength: 335 MPa, yield strength: 205 MPa, elongation: 31%. 20# seamless steel pipe: tensile strength: 410 MPa, yield strength: 245 MPa, elongation: 25%.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.