Carbon steel 09CuPTiRE-B steel yield chemical composition

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.

ASTM A242, 09CuPTiRE-B steel yield used in marine and humid environments, is a high-strength, corrosion-resistant alloy with a yield strength of 42,000 to 50,000 psi and an allowable bending stress of 25,200 to 30,000 psi.

20Mn2 steel has medium strength, and the properties of 20Mn2 steel and 20Cr steel are similar. The impact toughness and weldability of 20Mn2 steel at low temperature are better than those of 20Cr steel. The plasticity and machinability of 20Mn2 steel are high during cold deformation. The hardenability of 20Mn2 steel is higher than that of corresponding carbon steel, 09CuPTiRE-B steel yield. Chemical composition of 20Mn2 steel: C: 0.17-0.24, Si: 0.17-0.37, Mn: 1.40-1.80. Mechanical properties of 20Mn2 steel: tensile strength ≥ 785 MPa, yield strength ≥ 590 MPa, elongation after fracture ≥ 10%, section expansion rate ≥ 40%, impact absorbed energy ≥ 47J.

The large diameter cold drawn seamless steel pipe is a steel pipe with an outer diameter of more than 1000mm. The large diameter seamless steel pipe is made of steel ingot or solid billet through perforation and then hot rolling, cold rolling or cold drawing. If they are long, they need to remove the redundant parts, that is, cut them out. Their length 09CuPTiRE-B steel yield is suitable for the length required by the construction of steel pipes.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the 09CuPTiRE-B steel yield, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.