Points for attention in 05CuPCrNi weather resistant cutting

The difference between q345 and q235 steel 05CUPCRNI weather resistantThe lower limit of yield strength of Q345 is 345MPa (the actual meaning of Q is the Chinese character ""qu"", and the standard value behind means the lower limit of yield strength). Q235 steel is used for metal structural parts, nitrided or cyanidized parts with low core compressive strength requirements, support rods, crankshafts, crane hooks, couplers, bolts and nuts, sleeve specifications, shafts and weldments.

The wear-resistant plate 05CUPCRNI weather resistant shows good wear resistance: the chemical composition of the alloy layer contains 4-5% carbon and 25-30% chromium. The volume fraction of Cr7C3 carbide in the metallographic structure is more than 50%, the macro hardness is HRC56-62, and the hardness of chromium carbide is HV1400-1800. Because of the vertical distribution of carbides in the wear direction, the wear resistance of the cast alloy with the same composition and 05CUPCRNI weather resistant hardness is more than twice as that of the cast alloy with the same composition and hardness. Compared with several typical materials, the wear resistance is as follows: (1) compared with low carbon steel; 20-25:1 (2) with as cast high chromium cast iron; 1.5-2.5:1.

Preheating cutting: The most effective way to prevent steel plate cutting cracks is to preheat before cutting. Before flame cutting, the steel plate is usually preheated, and the preheating temperature mainly depends on the quality level and thickness of the steel plate. The preheating method can be carried out with flame burner, electronic heating pad, or heating furnace. In order to determine the preheating effect of the steel plate, the required temperature should be tested at the heating point.

Our company stocks a wide range of hot rolled carbon steel plate distributed globally from our service centers in the U.S., Canada, Mexico, U.K, France, Shanghai, and Singapore. Customers calling for 05CUPCRNI weather resistant A516 a lot of times are also trying to get their arms around forecast issues. As our customers continue to work on their forecasts, IRON & Steel has options to help you conduct structured forecast reviews and put inventory strategies in place to effectively manage any impact from forecast variability.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.