08cupvre steel material 800 tons exported to UAE

5mm 6mm hot rolled thin plates product 08CUPVRE steel material inventory: 5*3000*8000, 5*3000*8400, 6*2800*9390, 5*2800*11880, 6*2614*7050, 5*3000*11650, 5*3000*9900, 5*3000*8300, 6*2854*8200, 5*2790*10500, 6*2854*9680, 5*3000*8800, 6*2854*7480, 6*2614*9250, 5*2990*10470, 5*3000*8600, 6*2800*9390, 6*2854*8500, 5*2990*10400, 5*2990*9000, 6*2854*6480, 6*2854*6800, 5*3000*7550, 6*2854*9390.

In the production process of the ironmaking process, the moisture content and air temperature of the ironmaking blast furnace blast have a direct impact on the fuel consumption and fuel consumption structure of the ironmaking process. Blast furnace blast dehumidification is to remove the moisture in the blast furnace blast, eliminate the adverse effects of atmospheric humidity fluctuations on the blast furnace forward movement, and create stable operating conditions for the fans.

The effect of nitrogen (N) on the properties of 08CUPVRE steel material and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in 08CUPVRE steel material and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.

08CUPVRE steel material, Weathering steel plate is a kind of common steel plate. For ordinary steel plate, if it is used for a long time, it will contaminate the steel surface with a layer of rust, which will seriously affect the normal use of steel. Although the weathering steel plate will produce rust, this layer of corrosion is like a layer of dense oxide film, which is firmly attached to the steel surface to prevent the further corrosion of the base and steel. There are many weathering steel plate manufacturers will adopt some corrosion treatment methods.