09CuPCrNi-B steel tube 3000tons inventory in Brunei

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with 09CUPCRNI-B steel tube ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

The fake and inferior 09CUPCRNI-B steel tube, steel plates have no metallic luster and are light red or similar to pig iron for two reasons. 1. Its blank is adobe. 2. The rolling temperature of counterfeit and inferior materials is not standard, and their steel temperature is visually inspected. In this way, rolling cannot be carried out in the specified austenite area, and the performance of the steel plate will naturally not meet the standard.

Company tenet: first class quality and service to create corporate brand.Business philosophy: people-oriented, innovation, continuous improvement, the pursuit of excellence. Quality policy: carry forward the quality spirit, build a perfect quality management system, and put the quality strategy into every detail of the company's daily work.Environmental policy: waste reduction and pollution prevention, continuous improvement, and environmental protection.

Weathering steel 09CUPCRNI-B steel tube generally adopts the process route of refined material entering the furnace-smelting (converter, electric furnace-microalloying treatment-argon blowing-LF refining-low superheat continuous casting (feeding rare earth wire)-controlled rolling and controlled cooling. During smelting, the scrap steel is added to the furnace along with the charge and smelted according to the conventional process.