09cuptire-a equivalent Chinese Steel Prices: Steel Futures Rebound

Compared with ordinary steel, structural steel has the following differences. First, the strength of structural steel is high, and its bearing capacity is far greater than that of ordinary steel. Second, the structural steel has low impurity and carbon content, uniform material and good performance. Third, structural steel has light weight and is suitable for building various frames. Fourth, it is convenient to build structural steel, which is conducive to construction efficiency and reduces construction time. In some construction fields, structural steel must be used. Where can we find 09CUPTIRE-A equivalent, structural steel suppliers?

The main applications of normalizing are as follows:① For low carbon steel, 09CUPTIRE-A equivalent. The hardness of low carbon steel after normalizing is slightly higher than that after annealing, and the toughness is also better, so normalizing can be used as the pretreatment of cutting.② For medium carbon steel, normalizing can be used as the final heat treatment instead of quenching and tempering treatment, or as the preparation treatment before surface quenching by induction heating.③ Normalizing can be used in tool steel, bearing steel, carburizing steel and so on, which can eliminate or inhibit the formation of network carbide, thus obtaining the good microstructure needed for spheroidizing annealing.④ Normalizing can refine the cast structure and improve the machinability of steel castings.

Mechanical Properties A242 steel:ASTM A242 specification is made for low alloy steel with high strength, it has good atmospheric corrosion resistance, some applications has shown that it has better corrosion resistance than ASTM A36 steel and ASTM A572 Grade 50.Tensile: 70 ksi min (3/4 and under), 67 ksi min (3/4-1.5) 63 ksi min (over 1.5-4)Yield: 50 ksi min (3/4 and under), 46 ksi min (3/4-1.5) 42 ksi min (over 1.5-4)Elongation: 16% min in 8" 19% min in 2" (for plates wider than 24")

According to the data of the National Bureau of statistics, from January to February, the output of pig iron, crude steel and steel (excluding repetitive materials) were 132.34 million tons, 154.7 million tons and 167.13 million tons, respectively, up 3.1%, 3.1% and 3.4% year on year; the daily output of 09CUPTIRE-A equivalent, crude steel was 2.5783 million tons, down 5.15% year on year.