09CuPTiRE-B steel density Hot Rolled Steel Plate 1/4" x 4" x 4" Size

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with 09CuPTiRE-B steel density ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.

Hot-rolled steel sheet / cold-rolled steel sheet: Steel ingots or slabs are difficult to deform at normal temperature and difficult to process. They need to be heated to 1100 ° C to 1250 ° C for rolling. This 09CuPTiRE-B steel density rolling process is called hot rolling. Rolling at room temperature is generally understood as cold rolling. However, from the point of view of metallurgy, the boundary between hot rolling and cold rolling should be distinguished by the temperature of metal recrystallization, that is, rolling below the recrystallization temperature is cold rolling; Rolling above the recrystallization temperature is hot rolling.

After 1975, our equipment includes blast furnaces, electric furnaces, vacuum refining furnaces, and electroslag furnaces. The product varieties are relatively complete. Plates, 09CuPTiRE-B steel density tubes, wires, belts, and profiles have a certain scale, including magnetic, elastic, expanded, bimetal and other precision alloy materials for national defense and electronics industries. In 1982, these plants produced 364,000 tons of 09CuPTiRE-B steel density steel and 542,000 tons of steel.