11 mm thickness 09CuPCrNi-A steel standad chemical composition

The weldability of 09CuPCrNi-A steel standad is good. It means that under certain process and construction conditions, 09CuPCrNi-A steel standad can obtain good performance after welding. Weldability is a measure of the hot workability of steel. Weldability can be divided into weldability in construction and weldability in use. Weldability in construction refers to the sensitivity of cracking in weld metal and near seam zone, and hardening sensitivity of steel in near seam zone. Good weldability means that under certain welding process conditions, the weld metal and steel near the seam do not produce cracks. Weldability in use means that the mechanical properties of weld and HAZ steel are not lower than those of base metal.

Hot rolled 09CuPCrNi-A steel standad steel coil and plates are among our main products. Hot rolling can significantly reduce energy consumption and cost. During hot rolling, the metal has high plasticity and low deformation resistance, which greatly reduces the energy consumption of metal deformation. Hot rolling can improve the 09CuPCrNi-A steel standad processing properties of metals and alloys, that is, the coarse grains in the casting state are broken, cracks are obviously healed, casting defects are reduced or eliminated, the as cast structure is transformed into deformed structure, and the processing properties of alloys are improved.

After extrusion, the 09CuPCrNi-A steel standad tube shall be removed for sizing. The sizing machine uses a cone-shaped bit to rotate into the steel embryo at high speed to drill holes to form steel pipes. The inner diameter of the steel pipe is determined by the outer diameter length of the drill bit of the sizing machine. After sizing, the steel pipe will enter the cooling tower and be cooled by water spray. After cooling, the steel pipe will be straightened. After straightening, the steel pipe is sent to the metal flaw detector (or hydraulic test) by the conveyor belt for internal flaw detection.

Global 09CuPCrNi-A steel standad crude steel production in March this year increased by 2.6 percent month on month and fell by six percent year on year to 147.1 million metric tons. accordina to the World Steel Association (worldsteel).In the first quarter of this year, global 09CuPCrNi-A steel standad crude steel production decreased to 443.03 million mt, down 1.4 percent year on year.