4960 ton 08cupvre steel tensile to Thailand

Q355GNHE corten steel is characterized by adding a small amount of Cu, P, Cr, Ni and other alloying elements to the steel, so that the steel material forms a dense layer between the rust layer and the substrate with a thickness of about 50 to 100 μm and good adhesion to the substrate metal. The amorphous spinel oxide layer prevents oxygen and water in the atmosphere from penetrating into the steel substrate, slows down the rust development to the steel material, 08CUPVRE steel tensile, and greatly improves the steel material's resistance to atmospheric corrosion.

Advantages of 08CUPVRE steel tensile: 1. Steel purity: Wugang can produce high purity molten steel with P 0.010%, S 0.005%, N70ppm, O15ppm, H2ppm, and 20ppm total inclusions in the steel. 2. Good toughness and weldability. 3. The heat treatment technology: normalizing, quenching, tempering, tempering and other heat treatment processing can be carried out on the steel plate as required. 4. Significantly improve the plasticity and impact toughness of steel, and improve the anisotropy of steel.

The company strengthens process management and pays attention to assessment. One of the key points of good service is to strengthen the process management and improve the evaluation mechanism. Make the after-sales service system more perfect and provide better service for customers.

Flat steel is a kind of steel with rectangular cross-section and blunt edges at the edges and corners. It is usually 12-300 mm wide and 3-60 mm thick. Compared with 08CUPVRE steel tensile ordinary steel plate, the utilization rate of flat steel is increased by one to five percentage points. Moreover, flat steel can be produced with fixed thickness, width and length according to the user's requirements, which saves the cutting process for users, reduces the consumption of labor and materials, and also reduces the processing loss of raw materials, saving time, labor and material.