Cold rolled 05CuPCrNi steel factory sheet thickness mm

The heat treatment process can significantly improve the physical properties of steel, improve the compressive strength, ductility and service life of parts, and improve the hardness and wear resistance. Therefore, critical equipment parts and special tools must be quenched and tempered. The quenching and tempering treatment can also improve the production and processing performance of the 05CUPCRNI steel factory product workpiece, thereby improving the production efficiency and production processing quality.

First of all, we should establish a correct concept of after-sales service. Service concept is an important part of corporate culture and a long-term enterprise value concept. Our company's after-sales service embodies the concept of "customer first, sincere service for customers". As long as we are in the "sincere service for users" under the guidance of the idea, I believe we will get rich returns.

How to distinguish the inferior steel plate? 1. The surface of the fake and inferior steel plate is easy to produce scab. 2. The material of fake and inferior steel plate is not uniform and there are many impurities. The surface of fake and inferior steel plate is often pitted. Pitting is an irregular and uneven defect on the surface of 05CUPCRNI steel factory, steel plate caused by serious wear of rolling groove. Due to the pursuit of profit by the manufacturers of fake and inferior steel plates, the groove rolling often exceeds the standard.

05CUPCRNI steel factory, 09CuPCrNi-A weather resistant steel is origined in China. Its equivalent grades are JIS SPA-H, BS WR50A, Corten steel, etc. The Cu, P, Cr, Ni are important elements that gave 09CuPCrNi-A weather resistant steel its weathering ability. The Cu content of 09CuPCrNi-A steel is 0.25–0.50, P content is 0.060-0.12, Cr content is 0.30-1.25, Ni content is 0.12-0.65. For 09CuPCrNi-A steel coil ≤ 4mm, the min. yield strength is 310Mpa, min. tensile strength 440Mpa. For 09CuPCrNi-A steel sheets >4mm, the min. yield strength is 345Mpa, min. tensile strength 480Mpa.