Corrosion characteristics of 08CuPVRE weathering steel steel

The advantage of plasma cutting is that it can cut thin plates, stainless steel and non-ferrous metals, and the cutting speed is fast. The disadvantage of plasma cutting is that the incision will have a slope, and there will be noise when cutting. The advantages of water jet cutting are wide cutting range and environmental protection, but the disadvantages of water jet cutting are slow cutting speed and high energy consumption. Do you know what is the best cutting method for 08CUPVRE weathering steel?

The effect of alloy elements on the properties of heat treatment methods for thick steel plate: the performance of heat treatment method reflects the difficulty coefficient level of heat treatment process and the tendency of defects caused by heat treatment process. The key points include cutting performance, over temperature sensitivity, quenching aging tendency and air oxidation carburizing tendency. 08CUPVRE weathering steel, Carbon steel has high machinability, and slow cooling method can be used in heat treatment, which can reduce the deformation and cracking tendency of the products. The addition of Mn and Si will increase the over temperature sensitivity of steel.

On Jan. 31, 2019, BBN steel held the annual meeting with all employees, family members, and friends. It is a moment of joyand it is a moment to summarize the past and look forward.Looking back on 2018, BBN steel exported 08CUPVRE weathering steel more than 2 million tons of steel materials to all parts of the world and made outstanding contributions to infrastructure construction at home and abroad. In 2019, BBN steel will make 08CUPVRE weathering steel persistent efforts and forge ahead.

Smelting process of 08CUPVRE weathering steel, container plate SPA-H weather-resistant steel: The molten iron for smelting SPA-H steel must be pretreated by molten iron desulfurization. Before entering the converter, the sulfur content of the molten iron is ≤0.010%, and the slag on the surface of the molten iron is cleaned. Nickel plates, copper particles or nickel-copper alloys are added to the converter with scrap steel. The carbon content of the converter smelting end is required to be less than 0.06% to prevent the molten steel from being oxidized.