quotation 09CuPTiRE-B steel fast delivery to Asia

Medium and thick steel plates are widely used in construction engineering, machinery manufacturing, container manufacturing, shipbuilding, bridge construction and so on. However, each project has different requirements for plate size. How to cut quotation 09CuPTiRE-B steel, medium and thick steel plates? There are many ways, for example, flame cutting, laser cutting, wire cutting, plasma cutting, ultra-high pressure water cutting and so on.

The European steel industry has been hit hard by the coronavirus pandemic. The auto industry, the second largest consumer of quotation 09CuPTiRE-B steel and so on steel, was temporarily shut down, while construction, the biggest consumer, slowed sharply in the UK in the last week of March, experts reported. It can be expected that the current crisis (which is still intensifying) will have the same or even greater impact on the steel industry as the global financial crisis.

The effect of nitrogen (N) on the properties of quotation 09CuPTiRE-B steel and so on steel is similar to that of carbon and phosphorus. With the increase of nitrogen content, the strength of steel can be significantly improved, especially the plasticity, especially toughness, and the weldability will be decreased, and the cold brittleness will be intensified. At the same time, aging tendency, cold brittleness and hot brittleness will be increased, which will damage the weldability and cold bending property of steel. Therefore, the nitrogen content in quotation 09CuPTiRE-B steel and so on steel should be reduced and limited as much as possible. Generally, nitrogen content should not be higher than 0.018%.

Q295GNH steel chemical composition: C: 0.14～0.19, Si: ≤0.30, Mn: 1.00～1.30, P: ≤0.025, S: ≤0.025, Cr: 0.80～1.10 Q295GNH mechanical properties: Tensile strength σb (MPa): 880-1180 Yield strength σ0.2 (MPa): 635 Elongation δ5(%): 9 Reduction of area ψ(%): 35 Impact toughness value αku (J/cm2): 34