The 09CuPCrNi-B equivalent grades cold working and aging from BBN

09CUPCRNI-B equivalent grades surface cracks refer to the linear cracks on the surface of 09CUPCRNI-B equivalent grades, which should generally be the same as the forging or rolling direction. Formation reason: it is mainly due to the hairline, hot crack and cold crack caused by surface over burning, decarburization, looseness, deformation and excessive internal stress during processing (forging, rolling, heat treatment, quenching and tempering), as well as the high content of sulfur and phosphorus impurities on the surface. Inspection method: 09CUPCRNI-B equivalent grades surface cracks can be detected by naked eye observation, acid pickling, magnetic particle inspection, coloring inspection and metallographic method.

Q355GNH weathering steel: Q——The first letter of the Chinese pinyin of "Qu" in the yield strength;355——The lower limit of the lower yield strength of steel, in N/mm²;GNH——respectively the first letter of "Gao, Nai, Hou" Chinese Pinyin;Quality grades are divided into A, B, C, D, E(1)Q355GNH executive standard: GB/T 4171-2008(2)Q355GNH smelting method: the steel is smelted by converter or electric furnace, and it is killed steel.

We guarantee to provide all technical data required by users within one hour to provide reasonable quotation; to provide 09CUPCRNI-B equivalent grades reasonable quotation for products consulted by users within one hour; to provide investigation reception: we guarantee to receive the investigation of users at any time and provide various convenient conditions for users.

The selection principle of steel plate for high-rise building is: it can not only make the structure safe and reliable, but also can save steel and reduce the cost. Different use conditions should have different quality requirements. In terms of the mechanical properties of steel such as 09CUPCRNI-B equivalent grades, yield point, tensile strength, elongation, cold bending property, impact toughness etc. are the indicators to measure the quality of steel. In the design of steel structure, the appropriate steel should be selected according to the characteristics of the structure. The selection of steel is not only an economic problem, but also related to the safety and service life of the structure.