What is the 09CuPCrNi-A stel tensile strength extrusion technology

Welded pipe, also known as welded steel pipe, refers to the steel pipe made of steel plate or strip steel after crimping and forming, with a fixed length of 6 meters. The production process of welded steel pipe is simple, the production efficiency is high, the varieties and specifications are diversified, and the equipment investment is less, but the general strength is lower than that of seamless steel pipe. 09CuPCrNi-A stel tensile strength, Welded pipes have many uses and are almost ubiquitous in our lives. However, when choosing welded pipes, we must pay attention to performance and material characteristics.

When phosphorus, copper, chromium, nickel and other trace elements are added to the weathering steel sheet, a dense and strong adhesion protective film will be formed on the steel surface, which will hinder the corrosion from spreading and developing inside, and protect the substrate under the rust layer, so as to slow down the corrosion rate. That is why the weathering steel sheet, 09CuPCrNi-A stel tensile strength has good atmosphere corrosion resistance.

Generally, the production process of 09CuPCrNi-A stel tensile strength seamless steel tube can be divided into cold rolling and hot rolling. The production process of cold-rolled seamless steel tube is generally more complicated than that of hot rolling. The tube blank must be first rolled by three rolls, and then be subject to sizing test and cutting after extrusion. Then enter the annealing process. In appearance, the cold-rolled seamless steel tube is shorter than the hot-rolled seamless steel tube, and the wall thickness of the cold-rolled seamless steel tube is generally smaller than that of the hot-rolled seamless steel tube, but the surface looks brighter than the thick wall seamless steel tube, the surface is not too rough, and the diameter is not too much burr.

After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.